Job Description:
1、Responsible for NAND specs, features, command sequences, characterization, and NAND failure analysis for state-of-art SSD architecture.
2、Responsible for need to maintain a complete media matrix with all different parameters, (e.g. timing, power, physical data....etc) which tracks any change from NAND vendors.
3、Understanding of NAND flash physics, MLC/TLC technology and protocols to come out algorithm for endurance and reliability improvement.
4、Work on flash management system test plan for operation and drive NAND FA processes.
5. He/she also need to maintain a complete media matrix with all different parameters, (e.g. timing, power, physical data....etc) which tracks any change from NAND vendors.
6. The matrix will be used by SSD development team as bible to design state-of-the-art system.
7. The leader also need to apply his/her detail understanding of NAND flash physics, MLC/TLC technology and protocols to come out algorithm for endurance and reliability improvement.
8.He/she will work on flash management system test plan for operation and drive NAND FA processes.

Requirement:
1.Requires a minimum of a MSEE or related degree, plus 5 years NAND memory system experience.
2. Good hands on working knowledge of flash technology and NAND management of integrating 3D TLC into SSD systems.
3. Experience of debugging and solving flash problems in complex flash management systems.
4.Experience of creating, evaluating FA on flash devices.
5. Good knowledge of 2D MLC and 3D NAND flash physics.
6. Must be able to work with other development teams crossing different countries.
7. Excellent written, verbal communications and presentation skills.

職務說明:
1.Bluetooth SoC Firmware/Profile Development
2.Improve current architecture of firmware for high performance
3.Understand Bluetooth link management, and protocol
4.Understand Bluetooth profiles and operations
5.Bluetooth Embedded system integration and verification
6.IOT 相關產品開發

任職條件:
1. 良好的團隊精神, 工作積極, 為人踏實
2. 抗壓性高、獨立自主、溝通協調能力
3. 在IC設計產業10年經驗者
4. 藍芽 、MP3、Mobile Storage (MS) 、MCU產品經驗者尤佳

職務說明:
1.藍牙相關程式開發及撰寫

任職條件:
1.藍牙 stack, profile, 驅動程式與系統應用開發經驗
2.熟悉 embedded system
3.熟悉 Linux, Android 或其他 RTOS
4.三年以上 device driver 的移植或開發
5.三年以上 software/firmware的工作經驗
6.熟悉 Bluetooth, WIFI 或 Audio 者佳

職務說明:
1.SSD演算法開發與韌體程式撰寫

任職條件:
1.熟悉NAND flash管理演算法（FTL）和系統設計。
2.熟悉SATA或PCIe介 面協定。
3.有SSD firmware開發經驗，其它SD3.0，eMMC, UFS經驗也可。
4.有開發 SSD 開卡 Windows tools 或 FW 經驗。
5.電機電子工程相關,資訊工程相關,其他數學及電算機科學相關

Job Description:
1. Design of embedded analog/mixed-signal IC circuits for 8-bit/32-bit Microcontroller (MCU) or Systems-on-a-Chip (SoC);
2.The job includes detailed circuit design and analysis, schematic capture and layout, circuit simulation, behavior modeling (C++, Matlab, Verilog), IC testing and debugging;

Requirement:
1. Bachelor or Master in Electronic Engineering with at least 3 years relevant working experience;
2. Knowledge of engineering fundamentals especially in deep submicron CMOS technologies;
3. Hands-on IC layout skills and IC measurement skills;
4. Familiar with datacom standards such as MIPI, USB, PCIe, SATA/SAS, or 10G Ethernet a plus.
5. Familiar in any of the following analog design areas:
(A) RX: CTLE, DFE, CDR
(B) TX: Pre-emphasis, driver
(C) PLL, Frequency Synthesizer

任職條件:
1.熟悉COMS Sensor影像處理演算法，或晶片級設計，有豐富的ISP工作經驗。
2.熟悉ISP硬體架構，瞭解ISP內部模組的處理和流水，以及各個演算法點的實現和優化；
3.tunning方面，對sensor參數，3A調試，色彩調整有豐富經驗；